Skip to content
Brand Logo
  1. Forum
  2. Troubleshooting
  3. Resolve Controller

Resolve Controller

For customers with only the Resolve controller

This category can be followed from the open social web via the handle resolve-controller@forum.resolve-ev.com

7 Topics 36 Posts
  • S

    Intermittent OLED screen function

    2
    0 Votes
    2 Posts
    267 Views
    2
    Hey @Syncro, I have a similar issue. I just finished connecting all the low and high voltage wiring using the Resolve wiring harness. Before the HV was connected, the OLED would flash "Resolve-EV", then go black (which I am told is normal behavior). Now that I have the HV power and CAN connected, my OLED is just black. I can't get it to come on. I don't think just the screen is the issue, because I also tried getting it to go into Drive and spinning the motor, but that wasn't working either. Any update on your issue, or what fixed it? Thanks!
  • C

    Some first assembly notes and what happens when you do some things wrong.

    4
    0 Votes
    4 Posts
    404 Views
    L
    Cfalkenburg nope, my problem wasn't the 12volt battery, it was the drive battery. Something wrong I couldn't figure out so I bought another complete battery pack, 40kwh, working just fine.
  • I

    LeLink2 OBD2 not broadcasting / connecting to LeafSpy.

    7
    0 Votes
    7 Posts
    760 Views
    I
    Something to investigate - the version of OS on your device. This occurred to me before but I thought I’d covered it because I’ve always used 2 different devices iphone and iPad. iPhone is 26.4.2. iPad is 18.7.9. Since they were different but both failed to connect I put aside that idea. But this morning I dug out an old smashed screen iPhone running 15.8.4 and it connected first time after I turned Bluetooth off / on. A couple more tries and still worked. This is not a comprehensive proof of anything. It might just be lucky coincidence. I’m out for a while now, but if it regularly connects when I get back home for more testing, it’s the start of identifying the root cause.
  • R

    Resolve VCU not connecting to BOSSA

    6
    0 Votes
    6 Posts
    474 Views
    R
    @isak please could you advise any extra steps I could try like clearing/manual resetting the microcontroller to enable connection, or if any of the configuration solder links might affect connection? Alternatively I have access to an electronics lab if you could guide me through firmware update using JTAG/Atmel studio if this is an option. My soldering should be good enough if this is possible. I would also be happy to trade my controller in for a micro-usb or usb-c model. Thank you
  • E

    Oled screen dead on first startup Leaf 2017 80kw 30 kwh Type2 (euro) charge port

    12
    5
    0 Votes
    12 Posts
    1k Views
    L
    This is what came with my purchase, I have no idea what this little plastic piece is for.
  • L

    Error code 206

    1
    0 Votes
    1 Posts
    154 Views
    L
    Has anyone else experienced error code 206 showing on the OLED? If so, what did you do to resolve it? Details please! I have been stuck on this for about a month now with no remedy. See GE Jeep in the EV Conversions forum.
  • R

    Need a guidance for troubleshooting via CANBUS messages

    4
    1 Votes
    4 Posts
    917 Views
    R
    Much appreciated Isak! Thanks, Raine