Intermittent OLED screen function
-
As the little suggests i have a intermittent fault with my resolve oled screen.
I've gone through everything a good few times to diagnose it, but cant figure it out. Sometimes the splash screen comes up and it works fine, sometimes nothing. I cant predict it or do anything to cause the fault. Its pure luck as to when it chooses to work.All 4 wires are connected and wired correctly.
2 can wires, 1 negative and 1 live from the resolve ECU. When its working and not working all wiring, continuity and voltage remains correct.
Im not using any none-leaf none-resolve can components. Just the Resolve ecu, oled and then leaf bms, inverter, pdm etc.
Has anyone experienced this and have you found a solution? @isak
-
Hey @Syncro, I have a similar issue. I just finished connecting all the low and high voltage wiring using the Resolve wiring harness. Before the HV was connected, the OLED would flash "Resolve-EV", then go black (which I am told is normal behavior). Now that I have the HV power and CAN connected, my OLED is just black. I can't get it to come on. I don't think just the screen is the issue, because I also tried getting it to go into Drive and spinning the motor, but that wasn't working either.
Any update on your issue, or what fixed it? Thanks!