1966 Jeep CJ5 4x4, GE Jeep!

[isak]

Hi!
I would recommend being concise in your emails and not sending 14 emails in the span of 2h. It does not really make it easier for me to help you. To focus on what I think the issue is and as I wrote to you via email. The last console log you sent showed that the leaf BMS think's the packs voltage is 511V which i suspect is due to the voltage sensor is disconnected or not functioning properly. I would focus on solving that

[leshall89]

Ended up buying a whole other battery pack from a newer Leaf, 40kwh. No more error code, but motor won't spin.

[leshall89]

Found the culprit! This short connector had resistance in 2 of the 8 wires. I swapped it for another 8 wire cable and voila, spinning motor!!!

[leshall89]

And now we can finish putting it all together. Happy days!

[leshall89]

[leshall89]

[leshall89]

[leshall89]

[leshall89]

Water pump installed on front of motor, all hoses installed.

[leshall89]

@isak, I have a 52 second video of the GE Jeep maiden voyage I'd like to post (16.5MB). Is this possible?

[leshall89]

Been driving my Jeep around now for a couple months, super fun. Drive system is working great. Still in the testing phase for all systems but it seems to be up to the task. Appears to have about 80 miles of range. Haven't tested the 4x4 system yet, soon.